+91-99300 26730
+91-99300 26733

S-Force Hydraulic Cylinders & Pumps

SF Single-Acting, General Cylinders

Features

Designed for use in all positions.
Hard chrome plated plunger and inner of barrel resists wear and corrosion,
it also be more closed and extending cylinder life.
Maximum sized springs speed piston return and increase spring life.
Plunger wiper reduces contaminant.
Stop ring for piston blow-out protection.
Powder coat finish for increased corrosion resistance and antirust.
SFQB-3/8UF coupler and dust cap are included on all models..

For technical specification please refer our product catalogue page No. 03 & 04

Click On Image For Bigger View

SFRAC Single-Acting, Aluminum Cylinders

Features

Lightweight, aluminum design for maximum portability.
7075-T6 Aluminum alloy components for maximum strength and minimum weight.
Steel base plate and saddle for protection against load-induced damage.
Anodizing treatment plunger, surfaces and inner of barrel resists damage and extends cylinder life.
Maximum sized springs speed piston return and increase spring life.
Composite bearings prevent metal-to-metal contact, increasing cylinder life and resistance to side-load.
Stop ring for piston blow-out protection.
SFQB-3/8UF coupler and dust cap are included on all models.

For technical specification please refer our product catalogue page No. 05 & 06

Click On Image For Bigger View

SF Single-Acting, General Cylinders

Features

Designed for use in all positions.
Hard chrome plated plunger and inner of barrel resists wear and corrosion,
it also be more closed and extending cylinder life.
Maximum sized springs speed piston return and increase spring life.
Plunger wiper reduces contaminant.
Stop ring for piston blow-out protection.
Powder coat finish for increased corrosion resistance and antirust.
SFQB-3/8UF coupler and dust cap are included on all models.SFCLP Single-Acting, Pancake Lock Nut Cylinders
Flat design for use in confined area.
Special coating on piston and stop ring improves corrosion and abrasion resistance.
Safety lock nut for mechanical load holding.
Integral tilt saddle standard improves performance under side load.
Overflow port functions as a stroke limiter.
Single-acting load return.
Powder coat finish for increased corrosion resistance and antirust.
SFQB-3/8UF coupler and dust cap are included on all models.

For technical specification please refer our product catalogue page No. 07 & 08

Click On Image For Bigger View

SFRC Single-Acting, Collar threads Cylinders

Features

Collar threads, plunger threads and base mounting holes enable easy
fixturing (see page 12)
Hard chrome plated plunger and inner of barrel resists wear and corrosion.
Plunger wiper reduces contaminant.
Stop ring for piston blow-out protection.
Powder coat finish for increased corrosion resistance and antirust.
All collar threads have a cap for protection.
Maximum sized springs speed piston return and increase spring life.
SFQB-3/8UF coupler and dust cap are included on all models.

For technical specification please refer our product catalogue page No. 09, 10, 11 & 12

Click On Image For Bigger View

SFRSM Single-Acting, Low Height, Flat Cylinders

Features

Compact and flat design for use where in a narrow space.
Mounting holes permit easy fixturing.
Grooved plunger ends require no saddle.
Hard chrome plated plunger and inner of barrel resists wear and corrosion.
Maximum sized springs speed piston return and increase spring life.
Plunger wiper reduces contaminant.
Stop ring for piston blow-out protection.
Powder coat finish for increased corrosion resistance and antirust.
SFQB-3/8UF coupler and dust cap are included on all models.

For technical specification please refer our product catalogue page No. 13

Click On Image For Bigger View

SFRCS Single-Acting, Low Height Cylinders

Features

Lightweight, low profile design for use in confined spaces ,but stroke higher than SFRSM.
Grooved plunger end with threaded holes for mounting tilt saddles.
Hard chrome plated plunger and inner of barrel resists wear and corrosion.
Maximum sized springs speed piston return and increase spring life.
Plunger wiper reduces contaminant.
Stop ring for piston blow-out protection.
Powder coat finish for increased corrosion resistance and antirust.
SFQB-3/8UF coupler and dust cap are included on all models.

For technical specification please refer our product catalogue page No. 14

Click On Image For Bigger View

SFRCH Single-Acting, Hollow Plunger Cylinders

Features

Hollow plunger design allows for both pull and push forces.
Low profile and longer strokes fit in the tightest space.
Withstands full "dead-end" loads.
Collar threads for easy fixturing and all collar threads have a cap for protection.
Special center tube protect plunger and inner of cylinder increases product life.
Hard chrome plated plunger and inner of barrel resists wear and corrosion. Spring returing.
Wiper rings protect the piston, bore & tube from contamination.
Stop ring for piston blow-out protection.
Powder coat finish for increased corrosion resistance and antirust.
SFQB-3/8UF coupler and dust cap are included on all models.

For technical specification please refer our product catalogue page No. 15 & 16

Click On Image For Bigger View

SFRRH Double-Acting, Hollow Plunger Cylinders

Features

Hollow plunger design allows for both pull and push forces.
Relief valves protect against over pressurizing.
Withstands full "dead-end" loads.
Collar threads for easy fixturing(Except SFRRH-1001 & SFRRH-1508) and all collar threads have a cap for protection.
Special center tube protect plunger and inner of cylinder increases product life.
Hard chrome plated plunger resists wear and corrosion.
Wiper rings protect the piston,bore & tube from contamination.
Stop ring for piston blow-out protection.
Powder coat finish for increased corrosion resistance and antirust.
SFQB-3/8UF coupler and dust cap are included on all models.

For technical specification please refer our product catalogue page No. 17 & 18

Click On Image For Bigger View

SFRR Double-Acting Cylinders

Features

Double-acting design allows for both pull and push forces
Relief valves protect against over pressurizing.
Collar threads, plunger threads and base mounting holes for easy fixturing.
Hard chrome plated plunger resists wear and corrosion.
Wiper rings protect the piston and bore from contamination.
Stop ring for piston blow-out protection.
Powder coat finish for increased corrosion resistance and antirust.
SFQB-3/8UF coupler and dust cap are included on all models.
SFRR series cylinders are perfect for bridge lifting, building reconstruction, shipyard,utility and mining equipment maintenance.
As need power and precise positioning of heavy loads, SFRR series are the best solution.

For technical specification please refer our product catalogue page No. 19, 20, 21 & 22

Click On Image For Bigger View

SFCLSG Single-Acting, High Tonnage Cylinders

Features

Base mounting holes standard on all models.
Single-acting, load return
Hard chrome plated plunger and inner of barrel resists wear and corrosion.
Plunger wiper reduces contamination, extending cylinder life.
Integral stop ring provides piston blow-out protection
Powder coat finish for increased corrosion resistance and antirust.
SFQB-3/8UF coupler and dust cap are included on all models.

For technical specification please refer our product catalogue page No. 23, 24, 25 & 26

Click On Image For Bigger View

SFCLRG Double-Acting, High Tonnage Cylinders

Features

Base mounting holes standard on all models.
Double-acting, for push and pull.
Hard chrome plated plunger resists wear and corrosion.
Safety valve in retract side of cylinder helps to prevent damage in case of accidental over-pressurization.
Interchangeable, hardened grooved saddles are standard.
Plunger wiper reduces contamination, extending cylinder life.
Powder coat finish for increased corrosion resistance and antirust.
SFQB-3/8UF coupler and dust cap are included on all models.

For technical specification please refer our product catalogue page No. 27, 28, 29 & 30

Click On Image For Bigger View

SFCLL Single-Acting, High Tonnage, Lock Nut Cylinders

Features

Hard chrome plated inner of barrel resistes wear and corrosion.
Safety lock nut for mechanical load holding.
Interchangeable, hardened grooved saddles are standard.
Single-acting load return.
Overflow port functions as a stroke limiter.
Special coating on piston and lock nut improves corrosion and abrasion resistance.
Powder coat finish for increased corrosion resistance and antirust.
SFQB-3/8UF coupler and dust cap are included on all models.

For technical specification please refer our product catalogue page No. 31, 32, 33 & 34

Click On Image For Bigger View

SFCLS Single-Acting, High Tonnage Cylinder

Features

Lowest collapsed height for use in confined spaces.
Interchangeable, hardened grooved saddles are standard.
Single-acting, load return.
Overflow port functions as a stroke limiter.
Hard chrome plated plunger resists wear and corrosion.
Plunger wiper reduces contamination, extending cylinder life.
Powder coat finish for increased corrosion resistance and antirust.
SFQB-3/8UF coupler and dust cap are included on all models.

For technical specification please refer our product catalogue page No. 35, 36, 37 & 38

Click On Image For Bigger View

SFPH Steel Hand Pump

Features

SFPH Steel Hand Pump
Internal pressure relief valve for overload protection.
Large oil capacity, suitable for wide application.
Two speed auto-switch reduces manpower and increase efficiency.

For technical specification please refer our product catalogue page No. 39

Click On Image For Bigger View

PRODUCTS

QUICK LINKS